Display Query

Camloc Fasteners

The 2600 and 2700 series Camloc Fasteners exceed requirements for MIL-F-5591, Style 3, Size 2. Shear and tensile strength: 300 lbs. (ultimate), 200 lbs. (rated). Studs and washers listed are made of steel. The receptacles are made of copper base alloy. All components listed are rated to 450 degrees F.

The 4002 series fasteners are considerably stronger than the 2600 and 2700 series. Shear and tensile strength: 1050 lbs. (ultimate), 700 lbs. (rated). All studs and grommets listed are made of steel. Rated to 450 degrees F.

Stud Length Selection. Total material thickness "G" consists of the thickness of all materials to be fastened. This must include the thickness of the material "P" to which the stud assembly is attached, the material "F" to which the receptacle is attached, plus gaskets (if used) and allowance for paint or other protective finishes. If the total thickness is near the upper limit of the stud grip range, the next longer stud should be used. This will still maintain positive locking of the fastener under vibration.

Retaining washers are required for studs of -5 length or greater. Use split washer 2600-SW2 where it is desirable to have the stud fal away for minimum internal projection. Use internal tooth washer 2600-LW where it is desireable to retain the stud assembly rigidly.

Search Catalog:
(Part Number, Description, etc.)

Part Number ▲	Description	Price Each
2600-1	Camloc Fastener, 2600 Series, Length range 0.020 to 0.059.	1.95
2600-2	Camloc Fastener, 2600 Series, Length range 0.060 to 0.089.	1.95
2600-3	Camloc Fastener, 2600 Series, Length range 0.080 to 0.119.	1.95
2600-4	Camloc Fastener, 2600 Series, Length range 0.120 to 0.149.	1.95
2600-5	Camloc Fastener, 2600 Series, Length range 0.150 to 0.179.	1.95
2600-6	Camloc Fastener, 2600 Series, Length range 0.180 to 0.209.	1.95
2600-7	Camloc Fastener, 2600 Series, Length range 0.210 to 0.239.	1.95
2700-1	Camloc Fastener, 2700 Series, Length range 0.020 to 0.059.	1.95
2700-2	Camloc Fastener, 2700 Series, Length range 0.060 to 0.089.	1.95
2700-3	Camloc Fastener, 2700 Series, Length range 0.080 to 0.119.	1.95
2700-4	Camloc Fastener, 2700 Series, Length range 0.120 to 0.149.	1.95
2700-5	Camloc Fastener, 2700 Series, Length range 0.150 to 0.179.	1.95
2700-6	Camloc Fastener, 2700 Series, Length range 0.180 to 0.209.	1.95
2700-7	Camloc Fastener, 2700 Series, Length range 0.210 to 0.239.	1.95
4002-2	Camloc Fastener, 4002 Series, Length range 0.081 to 0.110.	2.15
4002-3	Camloc Fastener, 4002 Series, Length range 0.111 to 0.140.	2.15
4002-4	Camloc Fastener, 4002 Series, Length range 0.141 to 0.170.	2.15
4002-5	Camloc Fastener, 4002 Series, Length range 0.171 to 0.200.	2.15
4002-6	Camloc Fastener, 4002 Series, Length range 0.201 to 0.230.	2.15
4002-7	Camloc Fastener, 4002 Series, Length range 0.231 to 0.260.	2.15
212-12N	Camloc Receptacles, For use with 2600 & 2700 Series.	1.75
212-12ND	Camloc Receptacles, For use with 2600 & 2700 Series, Countersunk mounting hole for dimpled sheet.	1.95
214-16N	Camloc Receptacles, For use with 4002 Series.	1.95
214-16ND	Camloc Receptacles, For use with 4002 Series, Countersunk mounting hole for dimpled sheet.	2.50
2600-SW-2	Camlock Retaining Washer, For use with 2600 & 2700 Series.	0.25
2600-LW	Camlock Retaining Washer, For use with 2600 & 2700 Series.	0.18
4002-G	Camlock Flush Grommet, For use with 4002 Series.	0.75
4002-N	Camlock Plus-Flush Grommet, For use with 4002 Series.	0.75
R4G	Camlock Grommet Snap Ring, For use with 4002 Series.	0.24

POR = Price On Request; N/A = Not Available as Standard Items

Page 1 of 1